technical data sheet 7-16 adaptor plug - jack 60S101-KIMN1 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 61169-4, en 122190, din 47223 material and plating connector parts material plating center contact cube or equiv. silver, 3-6 m outer contact brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet 7-16 adaptor plug - jack 60S101-KIMN1 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 electrical data impedance 50 ? frequency dc to 7.5 ghz return loss ? 40 db @ dc to 3 ghz ? 35 db @ 3 ghz to 4.5 ghz ? 30 db @ 4.5 ghz to 7.5 ghz ? 25 db @ 7.5 ghz to 8.3 ghz insertion loss ? 0.05 x [ghz] f db insulation resistance ? 10 g ? center contact resistance ? 0.4 m ? outer contact resistance ? 1.5 m ? working voltage (at sea level) 500 v rms power handling (at 20 c, sea level, vswr 1.0) 1800 w @ 1 ghz 800 w @ 4 ghz rf-leakage ? 128 db @ dc to 1 ghz intermodulation (3 rd order) -128 dbm @ 2 x 20 w mechanical data mating cycles ? 500 coupling nut retention ? 1000 n center contact captivation: axial ? 200 n radial ? 2 ncm coupling torque (recommended) 25 to 30 nm proof torque ? 35 nm environmental data temperature range -55 c to +155 c rapid change of temperature di n en 122190, sub-clause 4.6.7 corrosion resistance din en 122190, sub-clause 4.6.10 vibration din en 122190, sub-clause 4.6.3 climatic category din en 122190, sub-clause 4.6.5 (55/155/56) damp heat din en 122190 , sub-clause 4.6.6 degree of protection (mated pair) iec 60529, ip68 2.5 bar 1h rohs compliant weight weight 106.5 g/pce draft date approved date rev. engineering change number name date benjamin kaindl 15.03.12 j_gramsamer 01.04.15 d00 15-0397 j_krautenb. 01.04.15 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
